Description
SKU#CTKCK-WS-09
This Cartek Steering Wheel Push button Control System is equipped with wireless technology, ideal when using a detachable or quick release steering wheel.
The Steering wheel control system contains a bolt pattern which enables it to be compatible with all 70mm PCD steering wheel bosses. The Control System is equipped with 8 independent channels which allow configuration to actions including momentary action, latching, latching with memory and flashing. The controller features 8 separate sealed push button switches with typical Cartek reliability for prolonged use under competition situations. The buttons on the panels are unmarked and the kit is supplied with 2 sticker sheets to allow the user to customise the buttons to suit their own requirements
Kit Contains:
- Control Panel
- Transmitter module
- Infra-red Receiver
- Relay Control Unit
- 2 x Button sticker sheets
Image is for illustration purposes only, steering wheel not included.
HOW IT WORKS
Cartek uses Infrared to communicate between the Steering Wheel and the Relay Control Module. By using this technology, the wireless communication is completely protected from outside signals such as radio waves and EMF unlike other systems on the market. The system also allows the wireless link to be full 360 degrees.
The infrared Transmitter module is mounted on the rear of the Steering Wheel Panel and is battery powered. The Transmitter only consumes electrical power when a pushbutton is pressed and therefore does not need to be turned off when not in use. When a button is pressed an LED on the Transmitter will show the status of the internal battery. If the LED shows Green then the battery is in good condition, if the LED shows Red then the battery needs to be replaced. Typically, the battery should last 3 years depending on usage.
The Relay Control Module allows users to configure how the buttons operate on the steering wheel. Each button can be individually configured to perform any 1 of 5 different functions:
Mode 1: Momentary action Mode
2: Latching (without memory)
Mode 3: Latching (with memory)
Mode 4: Flashing (slow speed, minimum 5 seconds)
Mode 5: Flashing (fast speed, minimum 3 flashes
)Mode 6: Flashing (slow speed, latching)
The Relay Control Module incorporates a status LED for each channel. Each relay channel can be wired to output 12v power/signal or 0v power/signal through its rear connectors (Relays rated at 10 A).
The Wireless Control System can be mounted to most racing and aftermarket steering wheels. It now comes a multi coloured vinyl pack and UV Fluorescent vinyl pack (glow in dark under UV light) allowing full customisation of the steering wheel.
Return Policy
Return accepted.
After receiving the item, you should start a return within 14 days.
And you should pay return postage and a restocking fee of 20%
Reviews
There are no reviews yet.