Description
Toyota TRD METAL HEAD GASKET 11115-AE001
LEVIN, TRUENO, COROLLA
Brand: Toyota
Product: Head Gasket 0.8mm AE101 AE111
Product: Head Gasket 0.8mm AE101 AE111
SPECIFICATIONS:
Thickness: 0.8mm
Torque: 70040kgcmCOMPATILITY NOTES:
Only for 4A-G 20Valve Silver/Black Engines.
Thickness: 0.8mm
Torque: 70040kgcmCOMPATILITY NOTES:
Only for 4A-G 20Valve Silver/Black Engines.
The TRD metal head gasket is a direct replacement for the factory head gasket and is better for higher cylinder pressure and heat.
Torque specs as per TRD bible state; 200,400,600,730 kg-cm in sequence.
Features
- Metal construction for improved strength
- Improved durability and ability to hold high compression
- Improved heat capacity
-20V 4AGE TRD
-Genuine TRD 0.8mm Headgasket
-Suits 20V 4AGE Blacktop and Silvertop
-Increases compression ratio about half a point (0.5)
-Great for fine tuning static compression ratio
No matter if you have a high dollar race engine or you simply have the head off of your street engine for service, consider using this TRD gasket to give a little more “pop”.
A normal OEM type gasket has a compressed height of 1.2mm – this metal gasket will be just under 0.8mm when compressed. This small difference in compressed height will result in a half point increase in compression ratio (0.5). If you are on a stock ECU this will give you a slight increase in torque and power at all RPM’s. With a standalone, the gains can be even greater.
Please be aware that while metal gaskets are extremely durable and resistant to blowing out under extreme loads (N/A or Turbo), they are a little harder to get to seal than OEM style gaskets. That being said, most new cars have all metal gaskets like this. Just let your engine machinist know if you are switching gasket styles when re-building. If you are not re-facing your head, just be very careful to fully clean the head surface when switching. We suggest bringing your machinist a 6 pack of beer to look over your head before you torque it back on
.
Reviews
There are no reviews yet.